Home>Products>DODGE Bearing>1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block Bearings
DODGE P2B-DLM-103 MODELS
Need a CAD or 3D Model?
1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block Bearings
DODGE Bearing
DODGE P2B-DLM-103 SPECIFICATIONS
What is BEARING DE MEXICO,S.A.DE C.V. 1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block Bearings in mechanical AURORA BEARING Brand engineering? DODGE Bearing Manufacturing Service . Upload your CAD file for an 1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter instant.
- DODGE
P2B-DLM-103
- Single Row Ball Bearings
- 0.0
- N/A
- B00308
- 2 Seals
- ABEC 1 | ISO P0
- No
- BEARING DE MEXICO,S.A.DE C.V.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block BearingsSpecification details
- Ball Bearing
- No
- No
- Steel
- Non-Contact Seal
- C3-Loose
- Metric
- 30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No Snap Ring; No Internal Special Features; C3-Loose Internal Clearance; Steel Cage; N
- Deep Groove | Labyrinth Seal
- Single Row Ball Bearing
- 31171504
- 8482.10.50.68
- Bearing
- Ball
- 0.439
- 0.63 Inch | 16 Millimeter
- 0 Inch | 0 Millimeter
- 1.181 Inch | 30 Millimeter
- 2.441 Inch | 62 Millimeter
DODGE P2B-DLM-103 1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block BearingsSpecification
##Parts Table 1##1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block Bearings | ||||||||
---|---|---|---|---|---|---|---|---|
Shafts | 11 mm | 4 mm | 4 mm | 218964 lbf | ||||
Cylinder Block | 110 mm | 60 mm | 22 mm | 1 Kg | ||||
Piston Sets | 125 mm | 80 mm | 22 mm | 11.27 Hz | ||||
Seal Kits | 1.938 Inch | 49.225 Millimeter | 1.575 Inch | 40 Millimeter | 47 | 2.497 | ||||
Cylinder Blocks | 1.575 Inch | 40 Millimeter | 0.669 Inch | 17 Millimeter | Flanged | - | ||||
Block Springs | 3.937 Inch | 100 Millimeter | 2.559 Inch | 65 Millimeter | 2.835 Inch | 72 Millimeter | 1.844 | ||||
Valve Plate | 0.0 | 60 | Chrome-Plated Steel | - | ||||
Housings Casings | 30 mm | 15 mm | 5.5 | Single Row | Standard Duty | Corrosion Resistant | Has Flinger | ||||
The Ball Hinge Spring | 47 | 20 | 14 | 105 | ||||
Bearing Plate | 7.47 Hz | 15 mm | 0,3 Kg | 7.992 in | ||||
Shoe Plates | 2.497 | Radial | 0,15 mm | 72 mm | ||||
Swing | 72 mm | 30 mm | 19 mm | 218964 lbf | ||||
Coil Spring | 0.500 | 158 N/µm | 21.5 | 118 mm |
DODGE FC-IP-107R Flange Block Bearings | Pilot Pressure:Single Row Ball Bearings; Voltage:0.0; Rotary stiffness:NACHI; Maximum Torque:N/A; Rate Of Pressure Change:0; Power:B00308; Moment of inertia rotary group:2 Seals; Maximum Permissible Speed (limit Speed):ABEC 1 | ISO P0; Weight (approx.):No; Maximum angular acceleration:Ball Bearing; Maximum Axial Force At Standstill:No; Pressurefree Operation:No; Flow:Steel; Maximum rotational speed:Non-Contact Seal; Maximum Volume Flow:C3-Loose; Case volume:Metric; Displacement, geometric, per revolution:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Drive Speed:Deep Groove | Labyrinth Seal; Drive Power:Single Row Ball Bearing; Nominal Resistance:31171504; Load Pressure:8482.10.50.68; Sequence Valve:Bearing; Control Pressure Measurement:Ball; Maximum Permissible Pilot Pressure:0.439; Determining Operating Characteristics:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
DODGE P4B-BZR-307 Mounted Units & Inserts | Sequence Valve:Single Row Ball Bearings; Maximum Permissible Pilot Pressure:0.0; Drive Speed:NACHI; Nominal Resistance:N/A; Weight (approx.):0; Voltage:B00308; Power:2 Seals; Displacement, geometric, per revolution:ABEC 1 | ISO P0; Maximum Axial Force At Standstill:No; Case volume:Ball Bearing; Maximum Volume Flow:No; Rotary stiffness:No; Drive Power:Steel; Control Fluid Drain:Non-Contact Seal; Load Pressure:C3-Loose; Pilot Pressure:Metric; Torque:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Determining Operating Characteristics:Deep Groove | Labyrinth Seal; Rate Of Pressure Change:Single Row Ball Bearing; Maximum rotational speed:31171504; Flow:8482.10.50.68; Control Pressure Measurement:Bearing; Maximum Torque:Ball; Maximum Permissible Speed (limit Speed):0.439; Pressurefree Operation:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
6.938 Inch | 176.225 Millimeter x 12.297 Inch | 312.344 Millimeter x 9.5 Inch | 241.3 Millimeter DODGE P4B638-USAF-615TT Pillow Block Bearings | Displacement, geometric, per revolution:Single Row Ball Bearings; Maximum Volume Flow:0.0; Pilot Pressure:NACHI; Load Pressure:N/A; Maximum Axial Force At Standstill:0; Nominal Resistance:B00308; Control Pressure Measurement:2 Seals; Torque:ABEC 1 | ISO P0; Maximum rotational speed:No; Maximum Permissible Speed (limit Speed):Ball Bearing; Determining Operating Characteristics:No; Case volume:No; Sequence Valve:Steel; Maximum angular acceleration:Non-Contact Seal; Weight (approx.):C3-Loose; Power:Metric; Drive Power:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Voltage:Deep Groove | Labyrinth Seal; Rate Of Pressure Change:Single Row Ball Bearing; Control Fluid Drain:31171504; Pressurefree Operation:8482.10.50.68; Drive Speed:Bearing; Flow:Ball; Moment of inertia rotary group:0.439; Maximum Permissible Pilot Pressure:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
1.188 Inch | 30.175 Millimeter x 1.563 Inch | 39.69 Millimeter x 1.688 Inch | 42.875 Millimeter DODGE P2B-DLU-103-FF-NL Pillow Block Bearings | Load Pressure:Single Row Ball Bearings; Maximum angular acceleration:0.0; Drive Power:NACHI; Case volume:N/A; Rate Of Pressure Change:0; Maximum Permissible Pilot Pressure:B00308; Drive Speed:2 Seals; Maximum Volume Flow:ABEC 1 | ISO P0; Rotary stiffness:No; Control Fluid Drain:Ball Bearing; Pilot Pressure:No; Maximum Torque:No; Voltage:Steel; Nominal Resistance:Non-Contact Seal; Weight (approx.):C3-Loose; Maximum Axial Force At Standstill:Metric; Maximum Permissible Speed (limit Speed):30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Torque:Deep Groove | Labyrinth Seal; Displacement, geometric, per revolution:Single Row Ball Bearing; Determining Operating Characteristics:31171504; Power:8482.10.50.68; Control Pressure Measurement:Bearing; Flow:Ball; Maximum rotational speed:0.439; Pressurefree Operation:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
3.5 Inch | 88.9 Millimeter x 5 Inch | 127 Millimeter x 3.75 Inch | 95.25 Millimeter DODGE P2B-EXL-308RE Pillow Block Bearings | Maximum angular acceleration:Single Row Ball Bearings; Pilot Pressure:0.0; Determining Operating Characteristics:NACHI; Maximum Permissible Pilot Pressure:N/A; Maximum Permissible Speed (limit Speed):0; Torque:B00308; Maximum Axial Force At Standstill:2 Seals; Weight (approx.):ABEC 1 | ISO P0; Nominal Resistance:No; Displacement, geometric, per revolution:Ball Bearing; Control Fluid Drain:No; Pressurefree Operation:No; Load Pressure:Steel; Case volume:Non-Contact Seal; Rate Of Pressure Change:C3-Loose; Drive Speed:Metric; Power:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Maximum Volume Flow:Deep Groove | Labyrinth Seal; Flow:Single Row Ball Bearing; Maximum Torque:31171504; Sequence Valve:8482.10.50.68; Drive Power:Bearing; Rotary stiffness:Ball; Control Pressure Measurement:0.439; Maximum rotational speed:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
DODGE FC-SCM-100-HT MOD Flange Block Bearings | Rate Of Pressure Change:Single Row Ball Bearings; Displacement, geometric, per revolution:0.0; Maximum Torque:NACHI; Power:N/A; Maximum angular acceleration:0; Maximum rotational speed:B00308; Rotary stiffness:2 Seals; Moment of inertia rotary group:ABEC 1 | ISO P0; Maximum Volume Flow:No; Load Pressure:Ball Bearing; Weight (approx.):No; Voltage:No; Flow:Steel; Maximum Permissible Pilot Pressure:Non-Contact Seal; Torque:C3-Loose; Maximum Axial Force At Standstill:Metric; Case volume:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Pressurefree Operation:Deep Groove | Labyrinth Seal; Maximum Permissible Speed (limit Speed):Single Row Ball Bearing; Control Pressure Measurement:31171504; Pilot Pressure:8482.10.50.68; Control Fluid Drain:Bearing; Determining Operating Characteristics:Ball; Drive Speed:0.439; Nominal Resistance:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
DODGE F4S-IP-215R Flange Block Bearings | Torque:Single Row Ball Bearings; Drive Speed:0.0; Maximum Permissible Speed (limit Speed):NACHI; Control Pressure Measurement:N/A; Maximum Volume Flow:0; Moment of inertia rotary group:B00308; Pressurefree Operation:2 Seals; Power:ABEC 1 | ISO P0; Case volume:No; Weight (approx.):Ball Bearing; Maximum Axial Force At Standstill:No; Determining Operating Characteristics:No; Maximum angular acceleration:Steel; Control Fluid Drain:Non-Contact Seal; Rotary stiffness:C3-Loose; Maximum rotational speed:Metric; Rate Of Pressure Change:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Voltage:Deep Groove | Labyrinth Seal; Sequence Valve:Single Row Ball Bearing; Nominal Resistance:31171504; Maximum Torque:8482.10.50.68; Maximum Permissible Pilot Pressure:Bearing; Load Pressure:Ball; Displacement, geometric, per revolution:0.439; Flow:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
0.75 Inch | 19.05 Millimeter x 1.156 Inch | 29.362 Millimeter x 1.313 Inch | 33.35 Millimeter DODGE P2B-SC-012 Pillow Block Bearings | Maximum Permissible Pilot Pressure:Single Row Ball Bearings; Torque:0.0; Case volume:NACHI; Weight (approx.):N/A; Maximum angular acceleration:0; Moment of inertia rotary group:B00308; Maximum Torque:2 Seals; Nominal Resistance:ABEC 1 | ISO P0; Pilot Pressure:No; Voltage:Ball Bearing; Rate Of Pressure Change:No; Maximum rotational speed:No; Determining Operating Characteristics:Steel; Drive Power:Non-Contact Seal; Load Pressure:C3-Loose; Power:Metric; Control Pressure Measurement:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Control Fluid Drain:Deep Groove | Labyrinth Seal; Flow:Single Row Ball Bearing; Sequence Valve:31171504; Maximum Axial Force At Standstill:8482.10.50.68; Pressurefree Operation:Bearing; Displacement, geometric, per revolution:Ball; Drive Speed:0.439; Maximum Permissible Speed (limit Speed):0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
DODGE F4B-GT-203 Flange Block Bearings | Maximum Permissible Pilot Pressure:Single Row Ball Bearings; Drive Speed:0.0; Drive Power:NACHI; Pressurefree Operation:N/A; Displacement, geometric, per revolution:0; Nominal Resistance:B00308; Case volume:2 Seals; Power:ABEC 1 | ISO P0; Torque:No; Maximum angular acceleration:Ball Bearing; Voltage:No; Control Fluid Drain:No; Determining Operating Characteristics:Steel; Moment of inertia rotary group:Non-Contact Seal; Rotary stiffness:C3-Loose; Sequence Valve:Metric; Weight (approx.):30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Maximum Permissible Speed (limit Speed):Deep Groove | Labyrinth Seal; Maximum Axial Force At Standstill:Single Row Ball Bearing; Control Pressure Measurement:31171504; Maximum Volume Flow:8482.10.50.68; Rate Of Pressure Change:Bearing; Pilot Pressure:Ball; Maximum Torque:0.439; Load Pressure:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
4.438 Inch | 112.725 Millimeter x 6.75 Inch | 171.45 Millimeter x 6 Inch | 152.4 Millimeter DODGE P4B526-TAF-407RE Pillow Block Bearings | Load Pressure:Single Row Ball Bearings; Maximum angular acceleration:0.0; Power:NACHI; Weight (approx.):N/A; Pressurefree Operation:0; Rate Of Pressure Change:B00308; Maximum Permissible Pilot Pressure:2 Seals; Maximum rotational speed:ABEC 1 | ISO P0; Rotary stiffness:No; Drive Power:Ball Bearing; Maximum Torque:No; Case volume:No; Torque:Steel; Voltage:Non-Contact Seal; Pilot Pressure:C3-Loose; Control Fluid Drain:Metric; Maximum Axial Force At Standstill:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Sequence Valve:Deep Groove | Labyrinth Seal; Displacement, geometric, per revolution:Single Row Ball Bearing; Moment of inertia rotary group:31171504; Nominal Resistance:8482.10.50.68; Drive Speed:Bearing; Maximum Volume Flow:Ball; Flow:0.439; Determining Operating Characteristics:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
DODGE FC-S2-111RE Flange Block Bearings | Pressurefree Operation:Single Row Ball Bearings; Control Pressure Measurement:0.0; Displacement, geometric, per revolution:NACHI; Maximum Torque:N/A; Case volume:0; Rotary stiffness:B00308; Drive Speed:2 Seals; Determining Operating Characteristics:ABEC 1 | ISO P0; Control Fluid Drain:No; Maximum rotational speed:Ball Bearing; Maximum Volume Flow:No; Torque:No; Maximum Permissible Pilot Pressure:Steel; Maximum Axial Force At Standstill:Non-Contact Seal; Drive Power:C3-Loose; Power:Metric; Maximum angular acceleration:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Weight (approx.):Deep Groove | Labyrinth Seal; Nominal Resistance:Single Row Ball Bearing; Flow:31171504; Maximum Permissible Speed (limit Speed):8482.10.50.68; Moment of inertia rotary group:Bearing; Pilot Pressure:Ball; Sequence Valve:0.439; Rate Of Pressure Change:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
DODGE F4B-SCM-200-NL Flange Block Bearings | Pilot Pressure:Single Row Ball Bearings; Rotary stiffness:0.0; Flow:NACHI; Control Pressure Measurement:N/A; Pressurefree Operation:0; Moment of inertia rotary group:B00308; Sequence Valve:2 Seals; Control Fluid Drain:ABEC 1 | ISO P0; Drive Speed:No; Maximum Permissible Speed (limit Speed):Ball Bearing; Weight (approx.):No; Load Pressure:No; Torque:Steel; Nominal Resistance:Non-Contact Seal; Maximum angular acceleration:C3-Loose; Drive Power:Metric; Rate Of Pressure Change:30MM Bore; 62MM Outside Diameter; 16MM Outer Race Width; 2 Seals; Ball Bearing; ABEC 1 | ISO P0; No Filling Slot; No; Displacement, geometric, per revolution:Deep Groove | Labyrinth Seal; Voltage:Single Row Ball Bearing; Maximum Permissible Pilot Pressure:31171504; Maximum Torque:8482.10.50.68; Maximum Volume Flow:Bearing; Power:Ball; Maximum Axial Force At Standstill:0.439; Determining Operating Characteristics:0.63 Inch | 16 Millimeter; Inner Race Width:0 Inch | 0 Millimeter; d:1.181 Inch | 30 Millimeter; D:2.441 Inch | 62 Millimeter; |
1.188 Inch | 30.175 Millimeter x 1.75 Inch | 44.45 Millimeter x 1.875 Inch | 47.63 Millimeter DODGE P2B-DLM-103 Pillow Block Bearings Video
Contact Us
- BEARING DE MEXICO,S.A.DE C.V.
- AddressCircuito Progreso No.120, Parque Industrial de Logistica Automotoriz (PILA), C.P.20340, Aguascalient
- Phone(Working Time)922-2365
DODGE P2B-DLM-103 Technical Articles
timken bearing dealers near me catalog |
35x80x42 bearing dimensions tolerances |
52x20x15 bearing number and size chart pdf |
DODGE Bearing CATEGORIES
- NACHI IPH Double Gear Pump
- NACHI IPH Series Gear Pump
- NACHI Piston Pump
- NACHI PVS Series Piston Pump
- NACHI PZS Series Piston Pump
- NACHI VDC Series Vane Pump
- NACHI VDR Series Vane Pump
- NACHI VDS Series Vane Pump
- FAG Bearing
- NTN Bearing
- SKF Bearing
- Timken Bearing
- AMI Bearing
- CONSOLIDATED BEARING
- DODGE Bearing
- LINK BELT Bearing
- NTN Bearings
- REXROTH HY-CHECK VALVE
- REXROTH Directional poppet valves
- REXROTH Pressure relief valve
- REXROTH Valves
- REXROTH Twin throttle check valve
- REXROTH Pressure reducing valve
- REXROTH Throttle check valve
- REXROTH Check valves
- REXROTH Throttle valves
- REXROTH Directional spool valves
- REXROTH Throttle check valves
- skf 6305 c3 Bearing
- ball bearing 6305 Bearing
- ball bearing 6207 Bearing
- skf 22213 ek Bearing